Looking for an example of a garage door installation step-by-step breakdown? Look no further than our recent project in Austin, TX! Our customer needed a custom size garage door at 16 feet wide by 8 feet tall. While a standard double-car garage door is usually 16 feet wide by 7 feet tall, our customer has an extra foot of height which can accommodate larger vehicles. We installed a non-insulated, white, grooved panel garage door that not only looks great on their property but also offers a sleek and modern design.
Check out our step-by-step installation process in the attached video and feel free to give us a call if you have any questions!
Step-by-Step Guide For Garage Door Installations:
When it comes to garage door installation, there are several steps involved. Here’s a breakdown of what to expect:
Step 1: Disengaging And Taking Down The Old Spring System
The first step in installing a new garage door is to take down the old spring system. This involves disconnecting the springs from the garage door track and removing the brackets that hold them in place. Taking down the old spring system can be dangerous, as the springs are under high tension. That’s why it’s best to call a professional to handle this part of the installation.
Step 2: Taking Down Old Garage Door Panels from Top to Bottom
After taking down the old spring system, the next step is taking down the old garage door panels from top to bottom. This can be done with a drill and a screwdriver.
Step 3: Installing The New Garage Door Panels
Once the old door and spring system are removed, it’s time to install the new garage door panels. Our customer chose a non-insulated, white, grooved panel garage door which is a popular choice for its durability and sleek appearance.
Step 4: Connecting The Hinges
After the panels are in place, we’ll connect the hinges to the garage door panels. This ensures that the door opens and closes smoothly.
Step 5: Installing The New Spring System
After the hinges have been installed, it’s time to put up the new spring system. This involves installing new brackets and connecting the springs to the garage door track. The spring system is now properly calibrated to ensure the door operates safely and efficiently.
Step 6: Adding Support Struts
When installing a new garage door, it’s important to ensure that it’s supported properly to extend its lifespan. In the case of our recent installation in Austin, TX, we added three struts to the garage door panels for extra support. While standard garage doors usually require only one strut for the top panel, this non-insulated garage door needed more support. Insulated garage doors have built-in support due to their thicker, stronger layers, but non-insulated doors require additional struts to ensure their longevity.
Step 7: Connecting the Opener
Once the struts have been installed, it’s time to connect the opener to the new garage door. This involves remounting the garage door opener on the ceiling and connecting it to the garage door.
Step 8: Triple Check That The Garage Door Opens and Closes Smoothly
Finally, it’s crucial to triple-check that the garage door opens and closes smoothly, paying close attention to any signs of irregularity. This thorough inspection allows the technician or installer to detect any issues that may not be immediately apparent, ensuring that the garage door functions properly.
Before Photo of The Old Garage Door:
This non-insulated almond-colored garage door with windows on the top panel had been in use for 15 years.
After Photo of New Garage Door Installation:
Installed on our recent project in Austin, TX, this sleek and modern garage door features a grooved panel design and is comprised of five non-insulated sections in a clean white color.
FAQs:
Q: Can I install a garage door myself?
A: While tackling a garage door installation on your own may be tempting, it’s best to leave it to the professionals. Removing the spring system can be dangerous and mistakes can cause serious damage to your new garage door, not to mention potential safety hazards.
Q: How long does a garage door installation take?
A: The length of a garage door installation can vary depending on the specific job. However, on average, it takes our team about half a day to complete a standard installation.
Q: What type of garage door is best for me?
A: We offer a variety of garage doors to fit any budget and style preference. Our team can help you choose the right door based on factors such as durability, insulation, and aesthetic appeal.
Conclusion:
At Genesis Garage Door, we’re committed to providing top-quality garage door installations in Austin, TX. With our step-by-step guide and professional installation services, we make the process easy and stress-free.
Don’t wait any longer to upgrade your garage door! Contact us today to schedule a consultation and let our team of experts help you choose and install the perfect garage door for your home. Trust us to handle the job with care and precision, ensuring a smooth and hassle-free experience from start to finish. Get in touch now and take the first step towards a safer and more stylish garage!
Call us at (737) 707-9920!
1 Gabriels Bluff Dr
Georgetown, TX 78626
Table of Contents
The post Step-by-Step Guide: How to Install a Garage Door in Austin, TX appeared first on Genesis Garage Door.
from
https://www.genesis-garage-door.com/step-by-step-guide-how-to-install-a-garage-door-in-austin-tx/
from
https://genesisgaragedoor.weebly.com/blog/step-by-step-guide-how-to-install-a-garage-door-in-austin-tx
from
https://michelleclark0.blogspot.com/2023/05/step-by-step-guide-how-to-install.html
from
https://michelleclark0.weebly.com/blog/step-by-step-guide-how-to-install-a-garage-door-in-austin-tx
from
https://luisbarajas0.blogspot.com/2023/05/step-by-step-guide-how-to-install.html
from
https://luisbarajas.weebly.com/blog/step-by-step-guide-how-to-install-a-garage-door-in-austin-tx
No comments:
Post a Comment